Products

SIMOTICS S-1FL6 high inertia motors are permanent-magnet synchronous servomotor and designed for operation without external cooling. The heat is dissipated through the motor surface. High acceleration due to the 300% overload capacity and can be combined with SINAMICS V90 to create a powerful servo system with hight functionality. Incremental or absolute encoders can be selected depending on the application. Rugged design with IP65 degree of protection for complete: for complete engine inckl. connectors. Smooth running quality thanks to low torque ripple. Maximum flexibility due to variants with incremental encoder (absolute encoder, with/without brake and plain shaft/feather key).

Applications: handling machines, packaging and labeling machines, horizontal packaging machines, automatic assembly machines, matal forming machines, printing machines (seriography), winders and others.

• Power
• 0,05kW – 7kW

• Shaft height
• 20-90mm

• Maximum torgue
• 0,16 – 33,4Nm

SIMOTICS S-1FK2 are compact permanent magnet synchronous motors with hight overload capacity and integrated encoder system for speed and possition control. Developed especially for areas with required synamic and precise movement. These servomotors are extremely compact and robust to meet event the most demanding requirements. SIMOTICS S-1FK2 are adapted to the SINAMICS S120 system.

Applications: machine tools, robots, handling systems and others.

• Power
• 0,4 – 7,1kW

• Shaft height
• 40-100mm

• Maximum torgue
• 1,27 – 50Nm

SIMOTICS S‑1FK7 are compact permanent magnet synchronous motors. Available accessories, gearboxes and encoders, together with an extended product range allow the SIMOTICS S-1FK7 to be adapted to any applications. They meet the constantly growing requirements of the most modern generations of machines. SIMOTICS S ‑ 1FK7  can be combined with SINAMICS S120 to create a powerful system with hight functionality. Integrated encoders for speed and position control can be selected depending on the application. The motors are designed to operate without external cooling and the heat is dissipated through the motor surface. SIMOTICS S‑1FK7 have a hight overload capacity.

Applications: machine tools, robots and handling systems for working with wood, glass, ceramics and stone, packaging, plastic and textile machines, printing machines etc.

• Power
• 0,05 – 8,2kW

• Maximum torgue
• 0,18 –  48Nm

SIMOTICS S-1FT2 are compact permanent magnet synchronous motors and developed to operate withouth external cooling. The heat is dissipated through the motor surface. These motors have a high power density, degreee of protection and overload capability.  SIMOTICS S-1FT2 can be combined with SINAMICS S120. SIMOTICS S-1FT2 also offer a wide range of variouse options for the SINAMICS S210. For example, high-resolution encoders of up to 26 bits improve system accuracy. Higher degrees of protection up to IP67, as well as various motor modifications make it easier to use in demanding conditions.

Applications: packaging machines, handling equipment, stacking units, automatic assembly machines, laboratory automation, further woodworking, glass and ceramic industry, digital printing machines etc.

• Power
• 0,05 – 7,1kW

• Shaft height
• 40-100mm

• Maximum torgue
• 0,16 –  50Nm

The SIMOTICS S-1FT7 servomotors are permanent magnet synchronous motors with highly compact dimensions. They meet the most stringent demands on precision, dynamics and speed setting range as well as on high degrees of protection and ruggedness. The motors are fitted with the latest encoder technology and are optimized for operation with our fully digital drive SIMATICS S120 and control systems. Natural, external or water-cooling are cooling types that can be selected. In the case of natural cooling, the developing thermal loss is drawn off via the surface area whereas an attached fan forces thermal loss away with external cooling. Maximum cooling – and, therefore, maximum performance – can be achieved with water-cooling.

Applications: machine tools, printing machines, robots and handling systems, vonveyor technology, packaging and textile machines, machines for processing plastics, wood, ceramics and stones.

• Power
• 0,85 – 45,5kW

• Shaft height
• 36-100mm

• Maximum torgue
• 2 –  250Nm

The SIMOTICS M-1PH8 motors are available as an asynchronous and a synchronous variant with forced ventilation or water-cooling methods to provide high power density and maximum thermal utilization over the complete speed range. Precise motion control applications are supported even at the lowest speeds.

Applications: motors have been specially designed for use as main drives in production machines and machine tools (drives in presses and extruders, convertes, spindle drives in machine tools, rotary axes in the paper and printing indutstries).

• Power
• 2,8 – 1340kW

• Shaft height
• 80-355mm

• Maximum torgue
• 13 –  12 435Nm

• Size
• 315 – 450 L

• Power range
• 160 – 1000 kW

○ basic measuring accuracy ± 0.075%, extended accuracy measuring ± 0,05% calibrated range
○ measuring range up to 60 Mpa
○ temperature load of separated membrane up to 400^oC
○ output signal 4-20mA, HART, PROFIBUS
○ quarantee of stability 5 years

○ temperature sensors – resistance thermometers and thermal junctions
○ contactless temperature sensors, portable and static
○ compensating and extension cables for thermocouples, wide range of insulation
○ temperature pressure converters – for head, ledge or plant
○ output signal 4-20mA, HART, PROFIBUS

○ better measuring accuracy ±0,2% BFSO (average variance from the whole input range)
○ overall measuring range from  -1 do 7000 bar
○ output signal 4-20mA, HART contact
○ local zero setting ± 2% from the whole range, temperature compensation

○ accuracy measuring ± 0,5%
○ measuring range from -50 up to 650^oC
○ supplementing electrical equipment electrical equipment, contacts current output
○ average of the indicatorsl NS63, NS100, NS160

○ accuracy measuring ± 0,5%
○ pipe diameter from DN5 to DN2500
○ output signal 4-20mA, HART, pulse, PROFIBUS
○ average of the indicators NS63, NS100,NS160
○ measuring principle electromagnetic, vortex, float, mass

○ Micro PLC S7-200
○ Universal modular PLC S7 – 300
○ PCL for the highest performance S7-400
○ Complete units C7 – combination of PLC and operating panel
○ Failsafe, redundant systems and their combinations

PC WinAC operation:

○ WinAC Basic – software emulated PLC
○ WinAC Slot – hardware PLC in the form of a PCI card

○ Push Button panels
○ Text displays
○ Symbol orientated operation panels
○ Graphical operation panels
○ Multifunction platform for visualisation and operation
○ SCADA system WinCC

○ Ethernet, industrial Ethernet
○ PROFIBUS FMS/DP/PA
○ AS-Interface

○ Modular peripherals ET200M
○ Slightly modular peripherals ET200S
○ Spark-safe peripherals ET200iS
○ Distributed peripherals with a high protection ET200X
○ Compact, cost effective peripherals, with high protection ET200Eco
○ Distributed peripherals for robotic applications ET200R

○ Rack PC – for installation of 19” boxes or as a desktop
○ Panel PC
○ Box PC – without display or keyboard

○ Portable notebook SIMATIC Field PG
○ Mobile work station SIMATIC Power PG

○ Suitable for small-medium sized systems
○ Wide range of uses
○ Integrated PROFINET

○ all functions of the standard CPU S7-1200 supplemented by safety functions

○ Suitable for large systems with high demands on performance, communication, and flexibility
○ Integrated display for better diagnostics

○ all functions of the standard CPU S7-1500 supplemented by safety functions

○ Ideal solution for peripherals
○ Compact dimensions allow placement direcly near the process
○ Used in crowded and hard to reach places

○ all functions of the standard ET200CPU supplemented by safety functions

○ suitable for simple visualization
○ Wdescreen display with diagonals from 3″ to 15″
○ Touch control with the possibility of control using real buttons
○ Complete units C7 – combination of PLC and operating panel
○ Sm@rtServer option (remote connection)

○ Vsualization of large and complex systems
○ Widescreen display with diagonals from 4″ to 22″
○ User comfort – 15 Mio colors and 170° viewing angle
○ Sm@rtServer option (remote connection)
○ VBS (Visual Basic Script) support

The display is designed for the visual display of text in the industry, such as text reporting, values and quantities, technological data and other text reporting. Visual display of graphics is also available.

The display communicates with the help of module interface for PROFIBUS protocol. Configuration file GSD is included with the module as part of its accessories. With the systems ABB AC 31, AC500 and others, such as SIMATIC S7 300, S7 400, we supply communication block (it’s part of the delivery).

The display accepts and presents data from a superior system. It features a visual display of errors, such as malfunctions with the PROFIBUS and CPU. It is possible to rotate the displayed information. For the emphasis of various phases or stages, it is also possible to activate a flickering (blinking) mode.

Height of a displayed symbol: 50 – 250 mm

Display resolution in height: 7, 16, 32 points

Configuration: Single-line display or multi-line panel. Set-in metal or plastic profile. There is a Perspex glass in front of the display unit 3 – 4 mm in thickness. The length of the display is variable, maximum length is 4.8 m.

Power supply: 230 V AC

This equipment is designed for the visual display of various numerical values within the industry, such as temperature, time, speed and other such values.
Communication with the display is possible due to synchronized communication, using 2 digital outputs from another system. If needed, it is possible to integrate with a communication module interface PROFIBUS.
The display will accept and visually display values from a superior system. For the emphasis of various phases or stages, it is also possible to activate a flickering (blinking) mode.

Power supply: 24 V DC, consumption 70 – 300 mA, depending on the number of switched on segments

Segments: Size – 38mm, 57mm, 100mm in standard. Custom-made up to 350mm.